E-mail:info@comilandscapelighting.com TEL:+86-755-23158250

COMI Lighting Limited

D2HLC24015 20W Seamless Butt-joint IP67 Linear Inground lights

COMI LANDSCAPE LIGHTING's D2HLC-series IP67 protected opal encapsulated linear LED luminaire with High quality and homogeneous light over entire emission surface made of PMMA and aluminium for indoor and outdoor in-ground/wall recessed/Ceiling recessed installation or surface mounting. Consisting of LED linear luminaire and mounting aluminium profile. Can be lined up optically and mechanically. Also suitable for installation into roads and parking lots. 

Features and Benefits: 
▪ PMMA one-time extrusion profile, maximum can be 3meter length. Customized length is available on request.
▪ High quality and homogeneous light over entire emission surface and dots free.
▪ Low voltage 24VDC working voltage.
▪ Color: single color (2200~6500K), tunable white, RGB, RGBW.
▪ Can be seamless connection: lined up optically and mechanically.
▪ Maximum stand weight: 30kN
▪ The inner strip light or light bar can be customized made, advised max 20W/meter.
▪ CRI80+ at least and CRI90 or CRI95+ are available.
▪ Various installation methods: in-ground/wall/Ceiling recessed installation or surface mounting.
▪  Bottom or direct end output cable: 1-end or 2-end output cable to open wires or IP67 Waterproof Connector.
▪ Fully PWM, 0/1-10V, DALI dimmable support ( DMX control is available upon request).
▪ IP67 suitable for indoor or outdoor.
▪ 2 Years warranty.

COMI Landscape lighting CE ROHS Dimmable IP67 symbols

D2HLC24015 20W Seamless Butt-joint Dots Free IP67 Linear Inground lights with Homogeneous Light Over Entire Emission Surface.


Material Specifications

LED Linear Profile PMMA one time extrusion profile, maximum can be 3meter length.
Customized length is available on request.
Light Window/ Diffuser

Thick Optical PMMA (T=10mm), efficiency≥70%.
One time extrusion  with linear profile

Cable Gland Mould injection IP68 Plastic 
Pressure capacity Maximum stand weight: 30kN
Radiation Plate Aluminum
Mounting Profile(incl.) Anodized or powder coated 6063 Aluminum profile. 
Customized length is available on request.
End Caps (1)PC plug for LED Linear profile(included).
(2)PC end cap for aluminum profile(NOT included for basic product, please order seperately).
Electrical Connection ▪ 1x cable 0.5meters H05RN-F 2x1.0mm² to open wires or Waterproof connector (for Single color)
Dimmable Support PWM, 0/1-10V, DALI


Technical Specificaitons

Item Number

Length
(mm)

Light Source
CRI(Ra)
(White color)
Lens
Selected Lens
 Degree (Θ1/2)
Input Voltage
 (VDC)
Typical Operating
 Current(mA)
Typical Power
Consumption(W)
Typical
Luminance(lm)

IP
Rated

D2HLC12010
500

120pcs SMD LED
(Single Color)

Ra>80
-
120°
24VDC
416
10
Cool white=610
Warm white=488
IP67
D2HLC24020
1000
120pcs SMD LED
(Single Color)
Ra>80
-
120°
24VDC
833
20
Cool white=1220
Warm white=976
IP67
Notes:
1. Color: Mono (2000K,2400K,2700K, 3000K, 4000K, 6000K, Red,Green, Blue and etc.) 
2. RGB, or RGBW or DMX RGB is available upon request.
3. Length can be 300mm, 500mm, 600mm,1000mm,1200mm,1500mm and etc.
4. Specifications are subjected to change without notice.


Parts for D2HLC-series Linear Inground Lights


Parts of D2WP-series IP67 Linear inground lights


Note: Basic product kit is NOT included End caps for aluminum profile , please order seperately.




Family Products


COMI Landscape lighting's D2TL-series IP67 Linear inground lights

Related Products