F16RGB -DMX and F16RGBW-SPI is Pixel chasing neon LED flex with 8pixels/m which is addressable and controllable by DMX or SPI controller, and this IP68 flexible dot free line neon LED flex with a W16.5×H16.5mm cross section. Opal polyurethane encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gases and protection against abrasion. Horizontal bending only, with radius of 8mm excellent solution for indoor / outdoor organic facade accent lighting or decorative applications requiring IP67 even IP68 ingress.Fully controllable by DMX or SPI.
Features and Benefits:
▪ Working Voltage: 24VDC
▪ Power Consumption: 12W/m, 15W/m, 18W/m
▪ Color: Sinle color, Tunable white, RGB, or RGBW
▪ Control methods: DMX or SPI for options(select one of them for the product).
(1) Signal Parallel Protected, DMX512 Signal Compatible,DMX Address Writable.
(2) 8pixel/meter or 10pixels/m, Each pixel of LED can be programmable or writable.
(3) By using our specialized control system, each output port support 512 pixels.
(4) Programmable to various color changing effects to cater to different applications
▪ Can be cuttable at regular intervals without damage the rest of neon strip.
▪ IP67 DIY screws type connector or IP68 mould injection type connectors.
▪ Single end or dual ends power cable:(1) Direct end, (2) bottom, or (3) side cable output.
▪ Provides various smart accessories for mounting and installation.
▪ Full encapsulated with IP68 Level and rating IK08.
▪ Standard 3 years warranty (5 years is available).
Important Note for the neon LED flex when underwater used:
1. Please select mould injection connector and the depth of underwater is <1.5Meters.
2. Used in swimming pool or fresh water pool only, CAN NOT be used in sea water.
Technical Specifications for DMX and SPI Versions F16 Neon LED Strip in Mon, Tunable white, RGB, RGBW Color:
Notes:
Model Number
(Color Type)
Working
Mode Support
Light
Color
Working
Voltage
Power
(W/meter)
Luminous Flux (LM/meter)
LED Type
LED Q'ty
(pcs/meter)
CRI
(Ra)
Beam Angle
Min
Cutting Unit
[cm (inch)]
Max
Continous Length
Per run (Meters)
Control
Mode
IC
Type
Pixel/Meter
One
End
Power Feed
Double
Ends
Power Feed
F16-24V-5050-56-DMX-XX
(4-Wire DMX single color or RGB)
DMX
(RS485)
UCS512
(4-Wire)
8Pixels/M
Single
Color,
RGB
24VDC
12W/M
R:49LM;
G:127LM; B:24LM; RGB:194LM
5050
LED
56LEDs/m
/
120°
12.5cm
(4.92in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.5ft)
F16-24V-5050-56-DMX-TW
(4-Wire DMX Tunable White)
DMX
(RS485)
UCS512
(4-Wire)
8Pixels/M
2200k+5000K,
3000K+5000K,
or Customized
24VDC
15W/M
372LM+410LM
5050
LED
56LEDs/m
Ra≥80
120°
12.5cm
(4.92in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.5ft)
F16-24V-5050-56-DMX3SM-XX
(5-wire DMX Single color/RGB)
DMX
(RS485)
UCS512
(5-Wire)
8Pixels/M
Single
color,
or RGB
Full Color
24VDC
12W/M
280~450LM
(White) |
R:29LM; G:96LM; B:19LM; RGB:145LM
5050
3-IN-1 LED
56LEDs/m
Ra≥80
(White)
120°
12.5cm
(4.92in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.5ft)
F16-24V-5050-56-DMX3SM-XX
(5-wire DMX single color)
DMX
(RS485)
UCS512
(5-Wire)
8Pixels/M
Single
Color
24VDC
12W/M
245LM
(3000K)
5050
3-IN-1 LED
56LEDs/m
Ra≥80
120°
12.5cm
(4.92in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.5ft)
F16-24V-5050-70-DMX3-RGB
(5-wire DMX RGB)
DMX
(RS485)
UCS512
(5-Wire)
10Pixels/M
RGB
Full Color
24VDC
15W/M
R:49LM;
G:127LM; B:24LM; RGB:194LM
5050
RGB
3-IN-1 LED
70LEDs/m
/
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
F16-24V-5050-70-DMX3-XX
(5-wire DMX single color)
DMX
(RS485)
UCS512
(5-Wire)
10Pixels/M
Single
Color
24VDC
15W/M
477LM
(3000K)
5050
3-IN-1 LED
70LEDs/m
/
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
F16-24V-5050-70-DMX3-RGBW
(5-wire DMX RGBW)
DMX
(RS485)
UCS512
(5-Wire)
10Pixels/M
RGBW
Full Color
24VDC
18W/M
R:50LM,
G:166LM, B:34LM, RGBW:402LM, 3000K:177LM
5050
RGBW
4-IN-1 LED
70LEDs/m
Ra≥80
(White)
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
F16-24V-5050-70-SPI3-RGB
SPI
UCS8903
(3-Wire)
10Pixels/M
RGB
Full Color
24VDC
15W/M
R:55LM;
G:177LM; B:30LM; RGB:255LM
5050
RGB
3-IN-1 LED
70LEDs/m
/
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
F16-24V-5050-70-SPI3-XX
SPI
UCS8903
(3-Wire)
10Pixels/M
Single
Color
24VDC
15W/M
383LM
(3000K)
5050
3-IN-1 LED
70LEDs/m
/
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
F16-24V-5050-70-SPI4-RGBW
SPI
UCS8904
(3-wire)
10Pixels/M
RGBW
Full Color
24VDC
15W/M
R:50LM,
G:163LM, B:29LM, RGBW:403LM, 4000K:184LM
5050
RGBW
4-IN-1 LED
70LEDs/m
Ra≥80
(White)
120°
10cm
(3.93in)
(7LEDs)
8Meters
(26.25ft)
16Meters
(52.3ft)
1.About light color:
(1)"XX" in item numbers stands for different single color: (1) Single color: VW(Very Warm White, 2200K), WW(Warm White, 2700K, 3000K), NW(Neutral White,4000K), PW(Pure White, 5000K), DW(Day White, 5700K), CW(Cool White, 6000~6500K); BL(Blue,465-470nm),GN(Green, 520-525nm), AM(Amber,585-595nm), OR(Orange, 600-610nm), LY(Lemon Yellow, 610-620nm), RD(Red, 620-630nm), PK(Pink, 630-645nm);
(2) TW(Tunable white, optional 2200k+5000K, 3000K+5000K,or Customized);
(3) Multi-color:RGB, RGBW(The Kelvin of "W" available at 2700K, 3000K, 4000K, 5000K, or other).
(4) If the Kelvin or wave length for the color you are looking for is NOT within the above range, please inquire us separately.
2. CV(Constant voltage, means the LED strip is with current-limiting resistor on board in every mini cutting unit); CC(Constant current , which the LED strip is with current-limiting constant current driving IC on board for every minimum cutting unit which enables the working current of each LED is the same and the brightness of the entire run length of the LED neon flex is uniform);
3. Specifications are subjected to change without prior to notice.
The above technical parameters are for DMX and SPI F16 Neon LED flex in mono, tunable white, RGB and RGBW color. For single color, tunable white color and multi-color RGB and RGBW versions F16 Neon LED Strip, please click below links:
(1) Multi-color tunable white RGB and RGBW F16 Neon LED Strip.
(2) Single color and tunable white F16 LED Neon Flex.
IP68 Injection moulded Connector for Neon LED flex:
Notes:
(1) Factory assembly ONLY;
(2)When the neon LED flex is underwater use, it is strongly advised to select injection moulded type connectors.
(3) Please view important notes about neon LED flex underwater use in this page>> FAQ for COMI Lighting IP68 Waterproof Neon LED flex.
IP67 DIY Snap type or Screws Type Connector for Neon LED Strip:
Mounting Accessories for LED Neon Strip Light:
(1) Aluminum mounting channel and flex Aluminum mounting channel/profile/Clip;
(2) Transparent PC channel/profile or clip;
(3) 316 Stainless Steel mounting clip, stainless steel mounting channel.
Inquire Welcome to COMI Landscape Lighting inquiry service, please complete the below fields and we will reply you as soon as possible