E-mail:info@comilandscapelighting.com TEL:+86-755-23158250

COMI Lighting Limited

Top View Neon LED Strip light Mono Tunable White RGB RGBW

Features and Benefits:
 Small size: W16.5*H16.5mm, length can be customized made.
▪ Opal white diffuser with uniform and soft light output and dot free.
▪ Materials: standard PVC, optional silicone.
▪ Top view and vertical bending design and min dia. 120mm bending.
▪ High brightness output up to 550LM/meter.
▪ Seamless connection support.
▪ Optional Light color: Single color, tunable white, RGB, RGBW
▪ Control method for options: PWM, DMX, SPI, pixel chasing & addressable support.
▪ Dimming with PWM,DALI, 0-10V or DMX dimming driver.
▪ Can be cuttable at regular intervals without damage the rest of neon strip.
▪ Optional IP67 DIY Snap or screws connector and IP68 Injection moulded connector.
▪ Single end or dual ends power feed cable for neon LED flex.
▪ Cable entry ways for options:
  (1) Direct end entry cable; (2) Side entry cable; (3) Bottom entry cable.
▪ Provides various smart accessories for installation to meet various applications.
▪ Max continuous length per run:8~30meters per run.
▪ Beam angle:120°.
▪ UV,flame,saltwater(Note: NOT seawater),solvent and dirt resistant.
▪ Rated IK08 and IP68, suitable for both indoor or outdoor applications. 
▪ Even can be underwater use and submersible in depth<2 meters.
▪ Operation temperature: -25°C~+50°C.
▪ Standard 3 years warranty (5 years warranty is available).
▪ CE, ROHS certificate.

 Important Notes for neon LED flex when underwater use:
1. Please select injection moulded connector and the depth under water is <2 Meters.
2. Used in swimming pool or fresh water only, CAN NOT be used in sea water.  

IP68 7mm Slim Neon LED Flex with Optional Clear or Milky Diffuser

Technical Specifications for Single color and Tunable white IP68 F16 Neon LED Strip Lights:

Model Number
(Color Type)
Working Mode OptionalLight Color
Working
Voltage
Power
(W/M)
Luminous Flux (LM/meter)
LED
Type
LED Q'ty
(pcs/M)
CRI
(Ra)
Beam
Angle
Min
Cutting
Unit
Max Continuous Length 
one End Power Feed Dual End Power Feed
F16-24V-3528-144-XX
(Single Color)
CV,
ON/OFF,
Dimming
2200~6500K,
RD, BL,GN, AM, PK, OR
24VDC 10W/M 380~530LM 3528 144LEDs/M Ra80 120°
8.33cm
(3.28inch)
(12LEDs)
10Meters
(32.8ft)
20Meters
(65.6ft)
F16-24V-3528-120-XX
(Single Color)
CV,
ON/OFF,
Dimming
2200~6500K,
RD, BL,GN, AM, PK, OR
24VDC 9W/M 300~470LM 3528 120LEDs/M Ra80 120°
10cm
(3.93in)
(12LEDs)
10Meters
(32.8ft)
20Meters
(65.6ft)
F16-24V-2835-120-XX
(Single Color)
CV,
ON/OFF,
Dimming
2200~6500K,
RD, BL,GN, AM
24VDC 10W/M 450~550LM 2835 120LEDs/M Ra80 120°
10cm
(3.93in)
(12LEDs)
10Meters
(32.8ft)
20Meters
(65.6ft)
F16-24V-2835-120-CC-XX
(Single Color)
CC,
ON/OFF,
Dimming
2200~6500K,
BL,GN, LY,PK
24VDC 10W/M 450~550LM 2835 120LEDs/M Ra80 120°
5cm
(1.97in)
(6LEDs)
15Meters
(49.2ft)
30Meters
(98.4ft)
F16-24V-2835-120-TW
(Tunable White color)
CV,
ON/OFF,
Dimming
2200k+5000K,
3000K+5000K,
or Customized
24VDC 15W/M 372LM+410LM 2835 120LEDs/m Ra80 120°
10cm
(3.93in)
(12LEDs)
10Meters
(32.8ft)
20Meters
(65.6ft)

Notes: 

1.About light color:
(1)"XX" in item numbers stands for different single color: (1) Single color: VW(Very Warm White, 2200K), WW(Warm White, 2700K, 3000K), NW(Neutral White,4000K), PW(Pure White, 5000K), DW(Day White, 5700K), CW(Cool White, 6000~6500K); BL(Blue,465-470nm),GN(Green, 520-525nm), AM(Amber,585-595nm), OR(Orange, 600-610nm), LY(Lemon Yellow, 610-620nm), RD(Red, 620-630nm), PK(Pink, 630-645nm);
(2) TW(Tunable white, optional 2200k+5000K, 3000K+5000K,or Customized);
(3) Multi-color:RGB, RGBW(The Kelvin of "W" available at 2700K, 3000K, 4000K, 5000K, or other).
(4) If the Kelvin or wave length for the color you are looking for is NOT within the above range, please inquire us separately.
2. CV(Constant voltage, means the LED strip is with current-limiting resistor on board in every mini cutting unit); CC(Constant current , which the LED strip is with current-limiting constant current driving IC on board for every minimum cutting unit which enables the working current of each LED is the same and the brightness of the entire run length of the LED neon flex is uniform);
3. Specifications are subjected to change without prior to notice.


The above technical parameters are for F16 single color and tunable white Neon LED flex only, for details about RGB, RGBW, DMX and SPI versions F16 Neon LED Strip, please click below links:

(1) RGB and RGBW F16 Neon LED Strip.
(2) DMX or SPI Dynamic Pixel F16 LED Neon Flex.





IP68 Injection moulded Connector for Neon LED flex:

Notes: 
(1) Factory assembly ONLY;
(2)When the neon LED flex is underwater use, it is strongly advised to select injection moulded type connectors.
(3) Please view important notes about neon LED flex underwater use in this page>> FAQ for COMI Lighting IP68 Waterproof Neon LED flex

injection moulded connector for F16 neon LED strip





IP67 DIY Snap type or Screws Type Connector for Neon LED Strip:

DIY snap connector and screws connector for F16 neon LED strip




Mounting Accessories for LED Neon Strip Light:

(1) Aluminum mounting channel and flex Aluminum mounting channel/profile/Clip;
(2) Transparent PC channel/profile or clip;
(3) 316 Stainless Steel mounting clip, stainless steel mounting channel.
mounting profile for F16 neon LED flex