E-mail:info@comilandscapelighting.com TEL:+86-755-23158250

COMI Lighting Limited

IP68 Mini Side View Neon Flex 8mm Made of PVC or Silicone

Features and Benefits:
▪ Ultra-thin design: W8*H16.5mm.
▪ Length can be customized made, up to 100meters max per piece.
▪ Opal white diffuser with uniform and soft light output and dot free.
▪ Side view and horizontal bending design, min diameter 80mm bending.
▪ Seamless connection linear lighting support.
▪ Luminous flux 200~250LM/meter.
▪ Single color: 2200-6500K, red, green, blue, amber, pink, orange, yellow.
▪ Dimming with PWM,DALI, 0-10V or DMX dimming driver.
▪ Can be cuttable at regular intervals without damage the rest of neon strip.
▪ Injection moulded connector:
(1) Direct end entry cable; (2) Side entry cable; (3) Bottom entry cable.
▪ Provides various smart accessories for mounting and installation.
▪ Max continuous length per run:
(1) One end Power feed: 10meters (24VDC), or 50Meters(48VDC)
(2) Double ends power feed: 20meters (24VDC), or 100Meters(48VDC)
▪ Beam angle:120°.
▪ UV,flame,saltwater(Note: NOT seawater),solvent and dirt resistant.
▪ Rated IK08 and IP68, suitable for both indoor or outdoor applications. 
▪ Even can be underwater use and submersible in depth<2meters.
▪ Operation temperature: -25°C~+50°C.
▪ Standard 3 years warranty (5 years warranty is available).
▪ CE, ROHS certificate.

Important Notes for neon LED flex when underwater use:
1. Please select injection moulded connector and the depth under water is <2 Meters.
2. Used in swimming pool or fresh water only, CAN NOT be used in sea water.

CE ROHS UL neon LED flex

Technical Parameters for F09 Neon LED Flex and Super Long 100meters max Continuous Length per run support:

Model Number
(Color Type)
Working
Mode
Light
Color
Working
Voltage
Power
(W/meter)
Luminous Flux (LM/meter) LED Type
LED Q'ty
(pcs/meter)
CRI
(Ra)
Beam
Angle
Min
Cutting Unit
[cm (inch)]
Max Continous Length
Per run (Meters)
One End
Power Feed
Double Ends Power Feed
F09-24V-2835-120-XX
(Single Color) 
CV,
ON/OFF,
Dimming
2200~6500K,
RD, BL,GN,LY, AM, PK, OR
24VDC 10W/M
200~250LM
(White color)
2835 120LEDs/m Ra80 120°
10cm
(3.93in)
(7LEDs)
10Meters
(32.8ft)
20Meters
(65.6ft)
F09-48V-2835-84-XX
(Single Color) 
CV,
ON/OFF,
Dimming
2200~6500K,
BL,GN,LY, PK
48VDC 5W/M
150~200LM
(White color)
2835 84LEDs/m Ra80 120°
16.67cm
(6.6in)
(14LEDs)
50Meters
(164ft)
100Meters
(328ft)
Notes: 
1.About light color:
(1)"XX" in item numbers stands for different single color: (1) Single color: VW(Very Warm White, 2200K), WW(Warm White, 2700K, 3000K), NW(Neutral White,4000K), PW(Pure White, 5000K), DW(Day White, 5700K), CW(Cool White, 6000~6500K); BL(Blue,465-470nm),GN(Green, 520-525nm), AM(Amber,585-595nm), OR(Orange, 600-610nm), LY(Lemon Yellow, 610-620nm), RD(Red, 620-630nm), PK(Pink, 630-645nm);
2. CV(Constant voltage, means the LED strip is with current-limiting resistor on board in every mini cutting unit); CC(Constant current , which the LED strip is with current-limiting constant current driving IC on board for every minimum cutting unit which enables the working current of each LED is the same and the brightness of the entire run length of the LED neon flex is uniform);
3. Specifications are subjected to change without prior to notice.




IP68 Injection molded Connector and Aluminum Mounting Profile for Neon LED strip Light:

F09 neon LED strip injection molded connector and mounting accessories