COMI Landscape Lighting symmetrical light output B4YB06-Series IP68 LED pool light is suitable as underwater spotlight for fountains, pools, ponds, water gardens etc. for atmospheric or underwater lighting.
Features and Benefits:
▪ Light source: 6pcs 2W Osram or 3W RGB 3-in-1 LED.
▪ Input Voltage:24VDC low voltage
▪ Made of SUS316L stainless steel completely for housing and accessories.
▪ Symmetrical light output (asymmetrical light output is available).
▪ Overheat sensor inside(Optional).
▪ IP68 waterproof,underwater installation in depth less than 1meter.
▪ Use the silicone with good stickiness and thermal effect for reach the purpose of radiating and prevent moisture.
▪ Standard non-dimmable.(Optional dimmable support with DALI, 1~10V, PWM. )
▪ PVC Mounting sleeve included.
▪ 2 Years warranty.
Warning:
▪ Water must be allowed to go inside and outside sleeve freely without leaking from the other side.
▪ This IP68 luminaire made of SUS316 L stainless steel,so DO NOT operate the lighting fixture out of water for over 15 minutes (cooling).
B4YB0657 B4YB0618 6pcsx2W or 3W RGB IP68 Symmetrical Wall Recessed LED Swimming Pool Lights
Completely Stainless Steel SUS 316L# Housing and Accessory
COMI Landscape Lighting IP68 LED pool light is suitable as underwater spotlight for fountains, pools, ponds, water gardens etc. for atmospheric or underwater lighting.
● (Optional function) dimmable or DMX 512, DALI, 1-10 V controllable is available. Standard is non-dimmable.
● Incude PVC plastic mounting sleeve.The mounting sleeve for B4YB06 IP68 LIGHT 6x 2 Watt or 3Watt is IP68. It seals towards the wall it is installed in.
● Warning: This IP68 luminaire made of SUS316L stainless steel must be installed under the water to prevent the light from burning up because of over-heating. and can not be operated out of water for over 15 minutes (cooling).
Material Specifications:
|
Front Cover & Housing |
Molding shaped stainless steel SUS 316L# |
| Window Glass |
Step tempered glass.T=8mm |
|
Gasket |
EPDM gasket |
| Lens |
Optical lens,efficiency≥85% |
| Cable Gland |
IP-68 PG-11 copper with nickel-coated |
| PCB |
Excellent heat conductivity aluminum. |
| LED Driver |
Constant current output: Single color LED=1-circuit output RGB 3-in-1 LED=3-circuit output |
| Power Cable |
H05RN-F 2X1.0mm2, L=3.0m(for single color) H05RN-F 4X1.0mm2, L=3.0m(for RGB) |
|
Application Environment |
Temperature of water between -20˚C~40˚C less than 1 meter depth. |
| Installation | PVC Mounting sleeve (included) |
|
Dimmable Support |
Standard non-dimmable. |
Technical Specifications:
| Item Number |
Light Source |
Lens |
Selected Lens |
Input Voltage(V) |
Typical Operating Current(mA) |
Typical Power Consumption(W) |
Typical Luminance(lm) |
IK Rate |
| B4YB0657 |
6x2W Osram |
B32 | 25 | 24VDC | 650 | 15.6 |
Cool white=853 Warm white=682 |
08 |
| B4YB0618 |
6x3W RGB 3-in-1 Full Color |
B8 | 30 | 24VDC |
R=300 G=320 B=320 |
22.6 | 420 | 08 |
|
C4YB0657 |
6x2W Osram |
C8 | 45/35 | 24VDC | 650 | 15.6 |
Cool white=754 Warm white=656 |
08 |
Note: Specifications are subjected to change without notice.
Dimensional Drawing(Units:mm)
Lens:
Asymmetrical Light Output Light effect:
Inquire Welcome to COMI Landscape Lighting inquiry service, please complete the below fields and we will reply you as soon as possible